Hello,
I have a Squeezebox Touch connected to my WHS 2011 with Lights Out Add-In. The Touch sends a magic packet to the WHS server, which immediately wakes up. The Lights Out Add-In is configured to go to hibernate mode after 5 minutes "non use" of clients. I marked all the "monitored sources", but the server hibernates 5 minutes after the startup of my server. Apparently, Lights Out does not see my wired Squeebox Touch as an IP based client.
Has anyone suggestions to keep the WHS server active as long as my Squeezebox Touch is in ON state?
best regards,
Heinz