Hello all
I need help I built a WHS2011 using a Super Micro X7SB4 MOBO and in the two PCI-Ex slots I have a a Highpoint Raid Rocket 2322 and a Raid Rocket 622 with Raid storage enclosures on them.
Everything works great all drivers install I updated the MOBO Bios and Both PCIex RR cards bios to the most current. Here is my Issue. When I turn on the Enclosures and create my different raid configurations the computer will not boot past the Raid Rocket Cards.
For example
1. If I have both enclosures turned off WHS boots fine
2. If I have both enclosures on it goes to RR2322 I see the drive status then the computer goes to a black with the cursor in the top left blinking away.
3. If i have just the RR2322 on I get same result as #2
4. If i have Just RR622 on I see the 622 bios drive status and then same clack screen with cursor
I never even get to the MOBO bios to see if they are set to boot first.
I have spent countless hours trying to figure this out.
Can anyone give me some advice please.