Hi
I inadvertently posted this in the networking forum (without resolution), so apologies for double post..
I'm struggling to get WHS2011 remote access to work. I get two errors: "There may be more than one router on your network" and "Remote Web Access to your server is blocked".
I am using my ISP modem router (Sky hub) as a modem for my domestic network and as a wireless router for guests (to keep them off my domestic network).
The sky router is setup on the .0.100 subnet and DHCP is enabled for wireless clients. It also 'feeds' my linksys WAG320N via a DMZ.
The linksys is the DHCP server for my private domestic network on the .2.100 subnet. The linksys has all the firewall and QOS features so that controls my domestic network. I have upnp and also opened the relevant ports on the linksys, but I still get the above two error messages and my WHS domain can't be found.
I can't use the sky hub to control my network as it has no QoS, is not a gigabit and tbh is a bit pants compared to the linksys. I also like the idea that my guest network is on a completely different subnet from my private domestic network.
Please help.
Regards
Z