My normally well running EX490 with WHS2011 suddently won't start (4x2TB HDD mounted)
The EX490 initiate as expected (fan and disk drive spin up) but then nothing happens. The 4 light blue indicaters don't light up and only the Power Light and the Healthlight (icon with _V- symbol) flashes. And then nothing. And without a screen and no ability to use RDT it's quite difficult to image, what is wrong
Problems started at the same time as the update of the Home Connector sw on the clients, but I doubt that there's a connection.
Any good suggestions?
Might be that I will leave this HW platform - used for Logitech Squeezeserver and documents/photos and videos.
The EX490 initiate as expected (fan and disk drive spin up) but then nothing happens. The 4 light blue indicaters don't light up and only the Power Light and the Healthlight (icon with _V- symbol) flashes. And then nothing. And without a screen and no ability to use RDT it's quite difficult to image, what is wrong
Problems started at the same time as the update of the Home Connector sw on the clients, but I doubt that there's a connection.
Any good suggestions?
Might be that I will leave this HW platform - used for Logitech Squeezeserver and documents/photos and videos.