Hi!
I' got problems with whs2011 remote access about 3 weeks ago. Remote access has been working fine before that. WHS told me that it cann't get domain ip updated (xxx.homeserver.com) repair settings.
I tried to repair, but did not succeed. Then I turned remote access off and after that I have not been able to turn it back again.
I have tried with checked upnp and unchecked. Always setting up hangs in "setting up router".
I have configured router forwarding many times, updated routers firmware to latest. Server has connection to internet. Now I don't know where to try find the problem. Is it on server side or router (D-link dsl-2640B).
I have asked teleoperator if they block ports. They convince that they don't block.
I had problems with one of my clients because windows 8.1 update 1 corrupted my component store. WHS2011 noticed this and gave warnings that updates in this client must be installed. First I tought that this might cause problem to my server remote web access because both problems started about same time. But now Windows 8.1 update is fixed (had to do repair) and I still have this problem with WHS2011.
Can I do some anything to solve this in server side or should I buy new router, if it has some problem which could not be fixed. Can I somehow reset remote web access settings in the server? If this helps.
Server settings - Remote Web Access shows now :
Router
Router IP: 91.153.xxx.xxx = my wan IP (should there be wan / lan ip?)
Model BRCM963xx (Broadcom)
Domain name
Sometimes my domain xxxx.homeserver.com is shown , sometimes empty.
I'm now stuck. I don't know what try try. I want to do some tries before I bought new router.
Any Advice?
Best regards
Laaakspen