I recently posted how I couldn't reinstall WSE2012R2E because the disk is a GPT ok so I am wainting around to figure out what to do so yesterday I connected all of my drives from WSE to my WHS2011 box. I went about starting a new pool and trying to get the remote access to work (I can now sign in to the page but I have broken gadgets and their isn't any files or computers listed I also set Madsonic up so I could get some remote media going on. Today I connected my Vantec 4bay HDD enclosure that I was having issues with in WSE and WSER2 (USB 3.0 drives dropping out) I disconnected to disk that I had installed internally in my WSE server and installed them in the enclose along with 2 drives I had be running in a Thermaltake BlacX dual hdd dock in station. I started the server back up and was very glad to see that all the disk were being shown the I opened up the dashboard and tried to add the disks back into the pool only to get a error message about not being able to find the specified disks. I then went into Windows Explorer found that the disks weren't listed as raw and you could see the data still shown as on there but then when I opened one it had no files same as the other one. I tried to run some disk tools without any success so now I am at a loss where are my files the disks says that it is almost still filled this is causing me a major headache. Ok this is strange just went into disk management and both drives are listed as ntfs but checkdisk says that they are RAW which will be really bad as I don't have anywhere to move them too at the moment.
↧