A common question we see popping up all over the Internet is how to upgrade from the beta version of Windows Home Server, or the 120 Day (See Edit below) Evaluation version of the software to the standard, licensed product. Many people have tried out WHS, have their hardware setup just right, and are impressed by what it brings to the home. So they get hold of the full version of the software… and then what?
Well, we have the answer, and it’s thanks again to WHS reader condition_unknown, who has written up a walkthrough for the FAQ section of the We Got Served forums.
Here’s what you need to do:
Upgrading Windows Home Server From a Beta or 120 Day Evaluation Version
The upgrade is actually a server reinstallation as opposed to a new install. This will keep all your existing files and storage pool intact. If this was a new install the drives specified for the storage pool would be formatted and one would lose the data on the drive. Make sure you make note of the users, passwords settings and Windows Live ID you had used in the previous install because you will have to re-enter this information. Also write down the fixed IP address and DNS names you used in the previous install.
1. Set BIOS to boot from optical drive.
2. When prompted, hit any key to boot from the drive.
3. When the installation window appears, select ‘Reinstall Server’.
4. Install will take over an hour and several reboots will occur.
5. After install finishes, you will have to setup your administrator password. Make sure that you use the same password as you had previously.
6. Install Ethernet drivers.
7. Open the Network properties for you network adapter’s TCP/IP settings and put in the values you had previously used.
EDIT: Note that in December 2009 Microsoft changed the period of the Trial Version to 30 Days - so it is no longer a 120 Day Trial
The Trial Version Download Details are here
Well, we have the answer, and it’s thanks again to WHS reader condition_unknown, who has written up a walkthrough for the FAQ section of the We Got Served forums.
Here’s what you need to do:
Upgrading Windows Home Server From a Beta or 120 Day Evaluation Version
The upgrade is actually a server reinstallation as opposed to a new install. This will keep all your existing files and storage pool intact. If this was a new install the drives specified for the storage pool would be formatted and one would lose the data on the drive. Make sure you make note of the users, passwords settings and Windows Live ID you had used in the previous install because you will have to re-enter this information. Also write down the fixed IP address and DNS names you used in the previous install.
1. Set BIOS to boot from optical drive.
2. When prompted, hit any key to boot from the drive.
3. When the installation window appears, select ‘Reinstall Server’.
4. Install will take over an hour and several reboots will occur.
5. After install finishes, you will have to setup your administrator password. Make sure that you use the same password as you had previously.
6. Install Ethernet drivers.
7. Open the Network properties for you network adapter’s TCP/IP settings and put in the values you had previously used.
EDIT: Note that in December 2009 Microsoft changed the period of the Trial Version to 30 Days - so it is no longer a 120 Day Trial
The Trial Version Download Details are here